MIMAKI UJF-3042HG Manual do Utilizador descarregar pdf (Página 23)

23 / 72

3-3-3 Perform Matte Print.

The method to perform Matte Print of clear liquid is explained. (Here, it is based on the premise that the basic

setting explained in 3-3 “Create the job for manual composition. (Group multiple jobs.)” has been completed.)

Select [Print Condition] - [UV

Mode].

Select “M

atte Print” of “Clear

Liquid Irradiation Mode”.

Set “Illuminance” at your will.

Set the number of “Additional

UV Irradiation” and “Illuminance”

at your will.

Depending on the density of

clear liquid, curing may not be

enough. In such a case, set the

Illuminance higher. Or, you can

specify the number of Additional

UV Irradiation to one to three and

perform curing later.

Hint

Click

the [OK] button to

terminate the image edit screen.

Select the jo

b in the [Job List]

and right-click. Then, select [RIP

and Print] to perform printing.

① Select

② Select

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 72 73

Sem comentários

MIMAKI UJF-3042HG Manual do Utilizador Página 23