MIMAKI UJF-706 Manual do Utilizador

Request for daily careInkjet printer is the precision machine that has highly delicate mechanism.Especially, little dust and paper powder may have eff

Cleaning the flushing tray108Replace Bemcot inside the flushing BOX.• When ink adheres to the inner box, wipe it with acloth.9Set the tray, the mesh,

11Avoiding ink dripping at printingInk droplets from the mist at drawing may arise on the bottom of the carriage. As the ink droplets may drip and s

125Remove the flushing box cover.• Lift it up to remove.6Bring down the flushing BOX.(1) Lift it up slightly.(2) Push it into the rear side.(3) Bring

Avoiding ink dripping at printing139Set the covers and the tray removed at Step 4, 5 and 6.10Turn the power ON.

14When the waste ink tray is fullWaste ink used for head cleaning gathers in the waste ink tank and the wiper tank.Periodically(every day) check the w

15When the waste ink tray is full7Lift up the duct inside the waste ink tank.8Pull out the waste ink tank.9Pour the waste ink into the other polyethyl

16Disposing of the waste ink in the wiper tankIf the wiper tank is full, an error appears on the display.When the error appears, dispose ink of the wi

When the waste ink tray is full177Take the wiper tank out, and dispose of the waste ink.• Turn the tank holding the tank cover, take outthe tank, and

18Cleaning of the UV lamp filterTo use this machine for a long time, clean the UV lamp filter at end of the day’s work.1Put out the UV lamp and switch

Cleaning of the UV lamp filter194Remove the UV lamp filter.• Remove the hand screw, and then remove the filterand the filter holder by moving them upw

2For safe operationInstallation environment and Notes on cleaning• Use this printer in clean (less dust) environment. The use of fan and ventilator mi

20Cleaning of the UV power supply filterTo use this machine for a long time, clean the UV power supply filter at start of the day’s work.1Put out the

Cleaning of the UV power supply filter214Use a vacuum cleaner to suc dust amd dirt from the filter• Wipe off the metal mesh at the UV power supply sid

22Cleaning of the optional vacuum unit filterWhen you use the optional vacuum unit (OPT-J0270), clean the filter of it (once in a week, or, when absor

Cleaning of the optional vacuum unit filter235Wipe off dust adhering to the lid with a waster cloth etc.• If big dust adheres to the lid, absorption m

24How to storeStorage of Antifreezing Liquid and Washing LiquidBe sure to store the Antifreezing liquid and the washing liquid in a cold and dark plac

25

26

27

Printed in Japan© MIMAKI ENGINEERING Co., Ltd. 2012ITFW : 1.9You can also download the latest manual from our website.D202112-16-16032012

3In case the print does not improveIf the print does not improve after head cleaning ( Operation ManualP.2-10), clean the wiper.The examples of defect

4Wiper cleaning1Turn the power on.2When <LOCAL> is displayed, press the key.3Select the [MAINTENANCE] with the key, and press the key.4Sel

In case the print does not improve57Wipe out the dirt of the wiper with the cleaning swab.• Wipe the places shown in the right.•If the dirt of the wip

611After cleaning, press the key.• Initializing starts.12Press the key to finish.WI PER CLEANCOMP L E TED : e n tENTEREND

In case the print does not improve7How to recover improper nozzle dischargeWhen not using this machine for a long time, or according to environmental

8Cleaning the flushing trayWhen you clean the flushing box, check the flushing filter, and replace this as needed. (about once a week)1Turn the power

9Cleaning the flushing tray4Wipe out ink on the surface of the flushing box.• Wipe out ink that has adhered by flushing on theflushing tray with cloth