MIMAKI TS5-1600AMF Especificações descarregar pdf (Página 31)

1-19

Basic specifications

*1 Without deflection of the roll when it is retained at both ends.

*2 Main unit and heater

Head height adjustment Can be set by user steplessly in the range of 1.5 mm to 7 mm (media thickness is automati-

cally recognized)

Cutting of media Cutting of Y direction by the head cutter,

Cutting accuracy (steps) : 0.5 mm or less.

Media delivery Take-up device supplied as a standard accessory (switching possible between take-up with

print side inside and take-up with print side outside), which can be used only with a 3-inch

core

Waste ink tank Bottle type ( 4,000 cc)

FULL state is detected with sensor

Interface USB 2.0

Command MRL-III

Noise during standby Less than 58 dB (FAST-A, Front & Rear & Left & Right 1 m)

during continuous printing Less than 65 dB

during discontinuous printing Less than 70 dB

Nozzle check unit Laser beam type (CLASS 1 or below)

Safety Standard VCCI-Class A, FCC-Class A, UL 60950, CE Marking (EMC, ), CB Report, RoHS, CLASS

1 Laser

Power AC 200 - 240 V ± 10%, 50/60 Hz ± 1 Hz 15A or less

Power consumption *2 3600 VA or less

Recomended Environment Available temp. 20 °C to 35 °C

Humidity 35 to 65 % Rh (No condensation)

Guaranteed temp. 20 °C to 25 °C

Temperature change ± 10 °C / h or less

Dust Equivalent to normal office level

Weight Main unit 398 kg or less

Outside dimensions Width 3120 mm

Depth 850 mm

Height 1540 mm

Item Specifications

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 287 288

Sem comentários

MIMAKI TS5-1600AMF Especificações Página 31