MIMAKI JV3-160S Guia de Configuração descarregar pdf (Página 115)

– 5.25 –

5-3-12. 500mmSQUARE

[Function]

Distance accuracy is adjusted.

The adjustment value in the Y-direction shall be applied to the detected mediun width.

The dimension of the Y-direction for the drawing itself will not be changed.

The adjustment values are stored under the system parameters No. 0 and 1. (X-direction =

No. 0, Y-direction = No. 1)

• The measured value in the Y direction becomes the b position when the distance

a – a’ in the above diagram is taken to be 500 mm.

• In this adjustment, the actual measurement is entered, but the value found from

the following formula is stored under the system parameter.

Adjustment value = 500 mm – Actual measurement (mm) (stored in units of 0.1 mm)

[Operation]

1) Select the ADJUSTMENT.

Press the

ENTER

key.

2) Select the “500mmSQUARE” pressing the

FUNCTION

key.

Press the

ENTER

key.

500mm

Flashing b

Medium

feeding

direction

FUNCTION

# ADJUST < ENT >

# ADJUST

500mmSQUARE < ent >

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 169 170

Sem comentários

MIMAKI JV3-160S Guia de Configuração Página 115