MIMAKI JV5-160S Especificações descarregar pdf (Página 200)

CHAPTER 6 Operation for Functions Invoking SET UP functions

6-10

REFRESH

Set the head refreshing level (running flush interval).

Available setting values: [0 ~ 3] ( Enhancing the level shortens the interval)

The setting values for each user type are stored separately from those for other user types.

VACUUM

Set the attracting force of the vacuum fan.

Irrespective of the setting, the vacuum level is always [STANDARD] during media detection, media cut-

ting or JOG operation.

Available setting values: [STRONG, STANDARD, Little WEAK, WEAK, OFF]

The setting values for each user type are stored separately from those for other user types.

PRIORITY

Concerning the following setup functions, select whether priority is given to the settings made on the

printer or to the designation from the host.

[MEDIA COMP.] , [HEATER] , [PRINT MODE] , [INK LAYERS] , [DRYING TIME] , [AUTO CUT] ,

[PRE-FEED] , [MARGIN] , [COLOR PATTERN] , [REFRESH] , [VACUUM] , [MEDIA FD.SPEED] ,

[MediaFD.METHOD]

Available setting values: [INDIVIDUALLY, ALL HOST, ALL PANEL]

The setting values for each user type are stored separately from those for other user types.

Even when setting has been made to give priority to the host, the settings made on the printer become

effective if there is no instruction from the host.

AUTO CLEANING (See 3-44)

Set whether or not to clean the heads automatically during printing.

Available setting values: [ON, OFF]

The first cleaning is performed immediately before the first printing after the printer is started. Then subse-

quent cleaning is performed every printing on the specified length of media.

The detail setting menu is displayed by pressing the [FUNCTION] key during automatic cleaning ON/OFF

selection.

CLEANING INTERVAL

Set the interval at which cleaning is to be performed periodically during printing.

Available setting values: [10 ~ 10000 mm] ( Default: 1000 mm)

CLEANING TYPE

Set a type of automatic cleaning.

Available setting values: [SOFT, NORMAL, HARD]

The setting values for each user type are stored separately from those for other user types.

INDIVIDUALLY For each function, set whether priority is given to the printer or to the host independently.

ALL HOST For all the functions, priority is given to the settings on the host.

ALL PANEL For all the functions, priority is given to the settings on the printer.

1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 261 262

Sem comentários

MIMAKI JV5-160S Especificações Página 200