MIMAKI UJF-706 Especificações Página 146
- Página / 184
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
5-4
Troubles displaying messages
When a problem occurs with this machine, the lamp lights in red, a buzzer sounds, and a corresponding
error message is displayed. Follow the table below and solve the problem.
Warning Message
Message Solution
• Fill ink.
• Replace the ink cartridge shown on the display as soon as possible.
( P.4-4)
• Replace the ink cartridge shown on the display.
( P.4-4)
• Attach the ink cartridge(s) shown on the display.
( P.4-4)
• Insert the ink cartridge shown on the display again. If the error is still
displayed after this, call a distributor in your district or our office.
• Check the type of the loaded ink cartridge is correct.
• Check the color shown on the display and the color of the loaded ink
cartridge are the same.
• Check the displayed ink cartridge, and then reinsert it. (Supported from
the firmware ver.1.80)
• Replace the displayed ink cartridge early. (Supported from the firmware
ver.1.80)
• The ink cartridge expiration date has passed. (One month has passed
since the expiration date.)
Replace the displayed ink cartridge early. (Supported from the firmware
ver.1.80)
• The ink has expired. Replace the ink cartridge shown on the display with
a new one.
( P.4-4)
• Use the MIMAKI ink.
• Wait until the protection process finishes and “ERROR 149” is displayed.
• Check insertion of the cartridge.
• An obstacle was detected. Remove it on the table or press the key
to lower the table.
<LOCAL.1> Not FILLUP
MMCC Y Y K K WWS S
<LOCAL.1> INK NEAREND
MMCC Y Y K K WWS S
<LOCAL.1> INK END
MMCC Y Y K K WWS S
<LOCAL.1> NO CARTRDG
MMCC Y Y K K WWS S
<LOCAL.1>WRNG INK IC
MMCC Y Y K K WWS S
<LOCAL.1>Ki nd of INK
MMCC Y Y K K WWS S
<LOCAL.1>Colorof INK
MMCC Y Y K K WWS S
<LOCAL.1>CARabnormal
MMCC Y Y K K WWS S
<LOCAL.1> INK LIMIT
MMCC Y Y K K WWS S
<LOCAL.1>L IMIT( IM)
MMCC Y Y K K WWS S
<LOCAL.1> Exp i rat i on
MMCC Y Y K K WWS S
< LOCAL . 1 > NON-OR I GNAL
MMCC Y Y K K WWS S
!INK UPSTREAM
GUARD : MMCCYYKK
CARTR I DGE ON / OF F
!MEDIA HE IGHT
TABLE DOWN
- MIMAKI ENGINEERING CO., LTD 1
- TABLE OF CONTENTS 2
- CHAPTER 6 Appendix 6
- Requests 8
- FCC Statement (USA) 8
- CDRH REGULATION 9
- Foreword 10
- For safe operation 11
- Never do the following 13
- Power supply and voltage 14
- Precautions for use 15
- About UV light 16
- About hot parts 16
- About cleaning 16
- About firing and smoking 16
- Notices for installation 17
- CHAPTER 1 19
- Before Use 19
- Installing this machine 20
- Moving this machine 21
- Configuration and Function 22
- Operation Panel 24
- Flushing Box 25
- UV power supply 26
- Connecting the cables 27
- UV irradiation device 28
- Setting the ink cartridge 29
- How to shake an ink cartridge 30
- About Media 34
- CHAPTER 2 37
- Basic Operations 37
- Operation flow 38
- Head cleaning 39
- Drawing an image from 39
- Turning the power off 39
- Turning the power ON/OFF 40
- <LOCAL> appears 41
- If hot water turned cool 42
- Fill ink into the subtank 43
- Turning the power OFF 44
- When turning the power OFF 46
- Setting media 47
- Press the key 48
- Test drawing 49
- Cleaning by Hard 51
- Cleaning by Wiping 52
- Cleaning by Hard2 53
- Drawing an image from data 54
- Cancelling the drawing 55
- When drawing stops 55
- Use the Copy Function 56
- About covers 57
- CHAPTER 3 59
- Useful Function 59
- Changing origin 60
- Adjusting head gap 62
- Checking head gap 63
- Reset the set value 66
- Setting the print condition 68
- Setting list 69
- Setting media compensation 70
- Setting the print method 72
- Registering head gap value 74
- • Setting Value: OFF, 1 to 9 78
- Setting the priority 79
- Setting Value: 0.0 to 2.0s 80
- Initializing the settings 81
- Turning OFF the UV lamp 82
- Setting time 87
- Setting Machine name 88
- Change the print quality 89
- Item Description 90
- For the information displayed 91
- Other useful functions 92
- CHAPTER 4 95
- Maintaining 96
- Cleaning exterior surfaces 97
- Ink cartridge 98
- Ink cartridge trouble 99
- Washing cartridge 100
- Cleaning the flushing box 101
- Flushing box 102
- How to care 103
- Carriage 104
- Main power switch 104
- Front lower left cover 104
- Front Lect cover 104
- FUNCTION 106
- Press the key to finish 111
- If blur or missing remains 118
- Subtank Maintenance 119
- Wiper cleaning 120
- Refill antifreeze liquid 122
- Refilling antifreeze liquid 123
- Open the front left cover 124
- Remove the UV lamp filter 124
- Remove the lid 128
- Remove the filter 128
- Articles required for 130
- Replacing UV lamp 132
- !UV LAMP 134
- LAMP CHANGE 134
- Cleaning of the Ionizer 139
- Attach the ionizer FAN 140
- Close the front right cover 140
- Daily Maintenance 141
- CHAPTER 5 143
- In Case of Trouble 143
- The power is not turned on 144
- Data is not drawn 144
- Message appears 144
- Problems of drawing result 145
- Nozzle clogging 145
- Troubles displaying messages 146
- Error message 148
- Message Solution 150
- CHAPTER 6 157
- Appendix 157
- Specifications 158
- Specifications for ink 159
- Position of the warning label 160
- Function Flowchart 162
- GAP CHECK 164
- MAINTENANCE 164
- MACHINE SETUP 164
- To P6-12 166
- From P6-10 168
- * * GAP CHECK * * 171
- PLEASE WA I T 171
- PLEASE CLOSE 171
- THE FRONT COVER 171
- To P6-18 172
- From P6-16 174
- To P6-22 176
- From P6-20 178
- D202102-20-01022013 183
- FW : 2.2 184
Manuais e produtos relacionados com Digitalizar e Imprimir MIMAKI UJF-706
Digitalizar e Imprimir MIMAKI JV3-130SPII Especificações
(142 páginas)
(142 páginas)
Digitalizar e Imprimir MIMAKI JV5-130S Especificações
(292 páginas)
(292 páginas)
Digitalizar e Imprimir MIMAKI JV5-320S Especificações
(130 páginas)
(130 páginas)
Digitalizar e Imprimir MIMAKI JV33-160 Especificações
(202 páginas)
(202 páginas)
Digitalizar e Imprimir MIMAKI JV3-75SPII Especificações
(150 páginas)
(150 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.039 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais