MIMAKI UJF-706 Especificações Página 87
- Página / 184
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
3-29
MACHINE SETUP
3
Useful Function
Setting time
1
When <LOCAL> is displayed, press the
key.
2
Select the [MACHINE SETUP] with the
key, and press the
key.
3
Select the [TIME SET] with the
key, and press the key.
4
The current time is displayed.
• Press the key to change the time.
5
Input time by the pressing the
keys.
• Year/Month/Day/Time selecting : by the keys.
• Year/Month/Day/Time inputting : by the keys.
6
Press the key.
• The input time is indicated.
7
Press the key several times to end.
• The time set in the past can be changed until only eight hours before the present displayed time.
• When a future time after the present one has been set by mistake, performing the following operations
in Step 4 enables the already set future time to be restored to the previously set time.
(1) Press the key in Step 4.
(2) Press the key.
If you have made several changes in time setting, only the last time to be set can be restored to the
previously set time. In addition, the time before change is ahead by the time that has elapsed.
<LOCAL . 1>
FUNCTION
FUNCT I ON
MACH I NE SET UP< ENT >
ENTER
MACH I NE SET UP
TIME SETUP <ent>
ENTER
TIME SET
2009 . 10 . 05 15 : 30 : 00
ENTER
TIME SET
2009 .10.0515:30:00
TIME SET
2009 . 10 . 05 15 : 30 : 00
ENTER
END
FUNCTION
ENTER
- MIMAKI ENGINEERING CO., LTD 1
- TABLE OF CONTENTS 2
- CHAPTER 6 Appendix 6
- Requests 8
- FCC Statement (USA) 8
- CDRH REGULATION 9
- Foreword 10
- For safe operation 11
- Never do the following 13
- Power supply and voltage 14
- Precautions for use 15
- About UV light 16
- About hot parts 16
- About cleaning 16
- About firing and smoking 16
- Notices for installation 17
- CHAPTER 1 19
- Before Use 19
- Installing this machine 20
- Moving this machine 21
- Configuration and Function 22
- Operation Panel 24
- Flushing Box 25
- UV power supply 26
- Connecting the cables 27
- UV irradiation device 28
- Setting the ink cartridge 29
- How to shake an ink cartridge 30
- About Media 34
- CHAPTER 2 37
- Basic Operations 37
- Operation flow 38
- Head cleaning 39
- Drawing an image from 39
- Turning the power off 39
- Turning the power ON/OFF 40
- <LOCAL> appears 41
- If hot water turned cool 42
- Fill ink into the subtank 43
- Turning the power OFF 44
- When turning the power OFF 46
- Setting media 47
- Press the key 48
- Test drawing 49
- Cleaning by Hard 51
- Cleaning by Wiping 52
- Cleaning by Hard2 53
- Drawing an image from data 54
- Cancelling the drawing 55
- When drawing stops 55
- Use the Copy Function 56
- About covers 57
- CHAPTER 3 59
- Useful Function 59
- Changing origin 60
- Adjusting head gap 62
- Checking head gap 63
- Reset the set value 66
- Setting the print condition 68
- Setting list 69
- Setting media compensation 70
- Setting the print method 72
- Registering head gap value 74
- • Setting Value: OFF, 1 to 9 78
- Setting the priority 79
- Setting Value: 0.0 to 2.0s 80
- Initializing the settings 81
- Turning OFF the UV lamp 82
- Setting time 87
- Setting Machine name 88
- Change the print quality 89
- Item Description 90
- For the information displayed 91
- Other useful functions 92
- CHAPTER 4 95
- Maintaining 96
- Cleaning exterior surfaces 97
- Ink cartridge 98
- Ink cartridge trouble 99
- Washing cartridge 100
- Cleaning the flushing box 101
- Flushing box 102
- How to care 103
- Carriage 104
- Main power switch 104
- Front lower left cover 104
- Front Lect cover 104
- FUNCTION 106
- Press the key to finish 111
- If blur or missing remains 118
- Subtank Maintenance 119
- Wiper cleaning 120
- Refill antifreeze liquid 122
- Refilling antifreeze liquid 123
- Open the front left cover 124
- Remove the UV lamp filter 124
- Remove the lid 128
- Remove the filter 128
- Articles required for 130
- Replacing UV lamp 132
- !UV LAMP 134
- LAMP CHANGE 134
- Cleaning of the Ionizer 139
- Attach the ionizer FAN 140
- Close the front right cover 140
- Daily Maintenance 141
- CHAPTER 5 143
- In Case of Trouble 143
- The power is not turned on 144
- Data is not drawn 144
- Message appears 144
- Problems of drawing result 145
- Nozzle clogging 145
- Troubles displaying messages 146
- Error message 148
- Message Solution 150
- CHAPTER 6 157
- Appendix 157
- Specifications 158
- Specifications for ink 159
- Position of the warning label 160
- Function Flowchart 162
- GAP CHECK 164
- MAINTENANCE 164
- MACHINE SETUP 164
- To P6-12 166
- From P6-10 168
- * * GAP CHECK * * 171
- PLEASE WA I T 171
- PLEASE CLOSE 171
- THE FRONT COVER 171
- To P6-18 172
- From P6-16 174
- To P6-22 176
- From P6-20 178
- D202102-20-01022013 183
- FW : 2.2 184
Manuais e produtos relacionados com Digitalizar e Imprimir MIMAKI UJF-706
Digitalizar e Imprimir MIMAKI JV3-130SPII Especificações
(142 páginas)
(142 páginas)
Digitalizar e Imprimir MIMAKI JV5-130S Especificações
(292 páginas)
(292 páginas)
Digitalizar e Imprimir MIMAKI JV5-320S Especificações
(130 páginas)
(130 páginas)
Digitalizar e Imprimir MIMAKI JV33-160 Especificações
(202 páginas)
(202 páginas)
Digitalizar e Imprimir MIMAKI JV3-75SPII Especificações
(150 páginas)
(150 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.038 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais