MIMAKI UJF-706 Especificações descarregar pdf (Página 34)

1-16

About Media

The sizes of media that can be used and the method of handling are described here.

Usable media size

Caution when handling the media

Carefully observe the followings to avoid a break of this machine or inferior printing.

Maximum width

710 mm

Minimum width

210 mm

Maximum print length

700 mm

Thickness

0.2mm to 150 mm

Roll media

(Option)

*1: For the roll media thickness, 0.025 mm thick or more can be used (use stretched media).

*2: For this machine, we provide an optional unit to use roll type media (roll media feeding/take-up machine).

For details, contact a distributor in your district or out office.

Outside diameter

φ250 mm or less

Weight

25kg or less

Caliber of the core

2 inches or 3 inches

Print face

Outer surface of the roll media

End of the roll media

Attach with a tape or a weak adhesive on the core

• Expansion and contraction of the media

Do not use sheet types of media immediately after unpacking.

The media can expand and contract due to room temperature and humidity.

The media have to e left in the atmosphere in which they are to be used for 30 minutes or

more after unpacked.

• Absorption of media

In order to fix the media, block the absorption holes on the table, which can not be covered

with media, with other media thinner than those to be used.

• Other notes

a Do not put anything on coated media. Some coated media may fox.

b Curled media not wholly absorbed or those that go out of alignment during table movement cannot

be used. They may be made available when they are fixed on the table with adhesive tape, etc.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 183 184

Sem comentários

MIMAKI UJF-706 Especificações Página 34