MIMAKI UJF-706 Especificações descarregar pdf (Página 50)

2-14

Head cleaning

If test pattern is not normal, execute head cleaning. There are 3 types of head cleaning.

Cleaning by Normal

When <LOCAL> is dipslayed, press the

key.

Select [normal] with the key,

and press the key.

Select execution of cleaning for each

head.

(1) Select the head with the key.

(2) Select execution of cleaning with the key.

• Select execution of cleaning for the all heads.

Execute cleaning ：The ink cartridge color

being set is displayed.

Not execute cleaning： “ * ” is displayed

Press the key.

• Cleaning starts.

• When the cleaning is completed, <LOCAL> is displayed.

Execute the test drawing, and check the pattern. (

P.2-13)

• Repeat cleaning and test drawing until the drawn pattern becomes normal.

Normal Select this when there is a dozen line missed on the test pattern.

P.2-14

Wiping

Select this when there are several lines missed on the test pattern.

The wiper wipes.

P.2-16

Hard

At the end of daily work, clean the head with washing liquid not to cure the

mist adhered to the nozzle, and then perform this.

It is recommended to perform this at the end of daily work, before turning the

power OFF.

P.2-15

Hard2

When discharging ink with hard cleaning, flushing is executed at the same　

time. Select this when nozzle dropout is not solved.

P.2-17

CLEANING

CLEAN I NG

TYPE : no rma l

ENTER

CLEAN I NG

COLOR : MM

CYYKKWWSS

CLEAN I NG

COLOR : MM

CYYKKWWSS

ENTER

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 183 184

Comentários a estes Manuais

Sem comentários

MIMAKI UJF-706 Especificações Página 50

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir MIMAKI UJF-706